Sunday 17 February 2013

Pleated Drop Cloth Ottoman Slipcover

                                             Welcome!!


This is one project that I have been trying to get to .

I have this ottoman that was in need of transformation.

Now this is a project that can be done without a sewing machine.

It looked like this..........



and when I was finished it looked like this.............




such an improvement don't you think

Let's get started........

First I measured the width and length  and then cut the dropcloth
so that it would drape down the same length on all sides.


Then I pinched in the corners and pinned the fabric to fit.



I did all four corners the same.
I sewed down removing the pins as I went.  This can be done by hand, but I used my sewing machine.









Next I trimmed the four corners I sewed and then I zigzagged around the bottom of the fabric and
the four corners to keep the fabric from fraying.(If doing it by hand you can use sewers  tacky glue to the 
edges to keep them from fraying)










To make the skirt on the ottoman I measured the around the ottoman and added 24 inches.

So that took in the pleats that I was going to make.

I cut three strips and joined them together.



 When using dropcloth there is always a finished side
that is zig-zagged . So when cutting my fabric I cut my width at 15 inches having the finished edge
to the top.





I sewed these three together at the finished edges. Now I have one large circle.

Next I finished off the edges with a zizzag (doing it by hand use the tacky glue)

Next I pinned the circle to the top piece.



Make sure you face right sides together when pinning.
When I came to the corners I made a box pleat.
Fold over fabric to 3 inches on both sides.



Then give it a good press.









When slipcover is on ottoman this is the finished look.




 Now it's time to try out the slipcover for fitting. At this time do any changes to make it fit.

 Now you are ready to sew these two pieces together.



 I finished off the skirt by topstiching all around the front of the skirt.(OPTIONAL)

Try on the slipcover again and start to mark your hemline. I just pinned along as I went.
Your hem is about 2 inches. Now you can sew in place by machine (or hand sew)





Time to give it a good ironing .

Here's your finished slipcover.








 If you have any questions please don't hesitate to email me.
I will gladly help. Be sure to visit my other DIY projects!!

                                                                     Thanks for visiting
                                                                              Linda

I'm linking up with:
I should be mopping the floor
The Dedicated House
Coastal Charm
It's So Very Cheri 
Creative Cain Cabin
Shabby Art Boutique
No Minimalist Here
Alderberry Hill 
 Between Naps on the Porch Met Monday
Debbiedoo's 
 My Romantic Home
It's Overflowing 
French Country Cottage
From My Front Porch To Yours 
The Farmhouse Porch
The Shabby Nest
A Shabby Art Boutique
Be Different Act Normal
Savvy Southern Style 
Nifty Thrifty Treasures
StoneGable Tutorial and Tidbits 
Blissful Whites
Miss Mustard Seed 
Common Ground
Katherines Corner
The Charm of Home 
Under The Table and Dreaming 
Funky Junk Interiors.
Get Schooled Saturday 
Cedar Hill Ranch 
Home Stories A to Z 
Made in a day
lady bird ln